Home / Products / Fiber Laser Cutting Machines / Full Enclosed with Dual Exchanged Table / Laser Cutter Metal

loading

Share to:
sharethis sharing button

Laser Cutter Metal

Laser cutting equipment specially used for cutting and processing metal materials has the characteristics of high precision, fast cutting, not limited to cutting pattern restrictions, automatic typesetting to save materials, smooth incision, and low processing cost. It will gradually improve or replace traditional metal cutting Process equipment, fast and efficient, energy saving and time saving, bring better benefits to enterprises.
Product Model: ST-FC3015G/ST-FC4020G/ST-FC1560G/ST-FC6020G/ST-FC6025G
Laser power: 1000W-20KW
Working area: 1500*3000mm (4000*2000mm, 1500*6000mm, 2000*6000mm, 2500*6000mm)
Availability:
Quantity:

Product Parameters       Samples       Video

laser cutter metal features


Features of laser cutter metal

1. Fully enclosed design with air conditioning room and dust isolation/automatic tracking smoke exhaust system, energy saving and environmental protection, good smoke exhaust effect. It can work continuously for 24 hours, which effectively prolongs the service life of the optical and electrical components of the machine.

2. The mechanical transmission part has been tested and calibrated by laser interferometer for many times to ensure that our machine can maintain good and stable accuracy even after several years of use.

3. Adopting high-power hollow structure machine tool, which effectively reduces the heating area during laser cutting process. Our machine tools are all welded with thick steel plates, and the weight of only one machine tool reaches 4 tons. The stability of the machine is greatly improved, at least 20 years of use without deformation.

4. Monitoring system, cameras are installed on the front and rear table of the machine, which can effectively monitor the working status of the table.

5. Adopt professional Raytools fiber laser cutting head with imported optical lens, smaller focusing spot and more accurate cutting line, ensuring higher efficiency and better processing quality. Equipped with non-contact automatic following function to ensure the best focusing and cutting effect.

6. Professional Cypcut cutting software, easy, flexible and convenient to operate.

7. With automatic loading and unloading function, higher material utilization rate.


Details of laser cutter metal

1. Adopt famous brand Raycus, MAX, IPG and other fiber lasers. Better and more stable beam quality, stronger resistance to high reflection, high reliability and long life.

2. Adopt automatic adjustment laser head, focal scale can be flexibly adjusted, no need to manually focus, easy to operate. Control the vertical height, automatic focus, quickly complete high-speed perforation of thick plates, automatically cut different thickness of materials.

3. The bed adopts integral welded structure, rough machining after annealing to eliminate internal stress, and finishing with secondary vibration aging treatment, which greatly improves the stability of the machine. The upper side of the main beam of the bed is paved with composite armor, which effectively improves the impact of the high temperature generated during high-power laser cutting on the overall structure of the frame; the bed is equipped with a smoke vent underneath, and the smoke is automatically discharged through the smoke exhaust pipe, which can make the smoke generated during the cutting process easily discharged to the outdoors and improve the working environment; the whole working area is fully enclosed with a cover, and the safety protection is reasonable.

4. The gantry beam design is adopted, with light weight, good rigidity, good dynamic performance and smooth running. Fully enclosed dust-proof structure greatly improves the service life of the built-in rack and pinion and linear guide. Anti-corrosion, anti-oxidation, good toughness and flexibility.

5. Metal plate and pipe cutting, applicable to different platforms and clamping and conveying methods, single platform, double platform interaction method, pipe clamping and feeding methods can be used.


Advantages of laser cutter metal

1. High precision, fast speed, narrow cutting slit, minimal heat-affected zone, smooth and burr-free cutting surface.

2. The laser cutting head will not touch the material surface and will not scratch the workpiece.

3. Narrowest cutting slit, minimal heat-affected zone, minimal local deformation of the workpiece, no mechanical deformation.

4. Good processing flexibility, can process any graphics, also can cut a variety of metal materials.

5. High performance, using imported fiber laser, stable performance, service life up to 100,000 hours or more.

6. low maintenance costs, photoelectric conversion efficiency of more than 30%, the use of air-cooled, can greatly save power consumption when working, saving operating costs, to achieve the highest production efficiency.

7. Energy saving and environmental protection, equipped with professional dust removal equipment. Low noise, clean, safe and pollution-free.


Laser cutter metal application

Application materials

Mainly for cutting carbon steel, silicon steel, stainless steel, aluminum alloy, titanium alloy, galvanized sheet, pickling sheet, galvanized sheet, copper and other metal materials for rapid cutting.


Application industry

Widely used in sheet metal processing, advertising signs production, high and low voltage electrical cabinet production, mechanical parts, kitchen utensils, automobiles, machinery, metal crafts, saw blades, electrical parts, glasses industry, spring sheets, circuit boards, electric kettles, medical micro Electronics, hardware, knife measuring tools and other industries.


Parameters of laser cutter metal

Model

ST-FC3015G/ST-FC4020G/ST-FC1560G/ST-FC6020G/ST-FC6025G

Table Max. cutting size

1500*3000mm (4000*2000mm, 1500*6000mm, 2000*6000mm, 2500*6000mm)

Laser power

1000W-20KW

Transmission system

Double rack & pinion and servo drive

Transmission

High precision screw guide transmission

Laser wave length

1064nm

Laser source

Raycus Brand (MAX, IPG can be choosed)

Maximum speed

120m/min

X.Y axis location accuracy

±0.01mm

X.Y axis repeat location accuracy

±0.01mm

X.Y axis max moving speed

30m/min (also according to kind of materials and thickness)

Cooling mode

Water Cooling

Maximum acceleration

0.5G

Equipment power

8KW(not include laser generator and chiller)

Working environment

0-45℃ ,Humidity ≤ 80%, non-condensing

Graphic format supported

AI, PLT, DXF, BMP, DST, DWG, DXP

Working voltage

220V±10%, 50-60Hz / 380V±10%, 50-60HZ

Applicable material

All metal (stainless steel, brass, aluminum, titanium steel, etc)

Machine weight

7500KG

Machine dimension (L*W*H)

8850*3210*2100mm


laser cutter metal samples-Suntop



 

Previous: 
Next: 

Related Products

More than 10 precision production line, easy to realize large quantities of goods, to provide you with the best price.
Contact Us
  No 317, Mu Dong RD, Wu Zhong DIST, Suzhou City, Jiangsu Province, China
 info@suntoplaser.com
  +86 13771746401

Products

Quick Links

© 2023 Suzhou Suntop Laser Technology Co., Ltd  All rights reserved.