Laser collimator is one of the core components of fiber laser cutting machine, marking machine, welding machine and other laser equipment. Different optical elements allow optimization of beam collimation for different measurement processes. In order to improve the fiber coupling efficiency and reduce the beam divergence angle, a fiber collimator needs to be installed at the fiber port.
● The beam is highly collimated. After being adjusted by the fiber collimator, the divergence angle of the beam does not exceed 2°.
● Good consistency, the working distance consistency is greater than 99%.
● The laser light transmittance is high, the reflectivity is low, and the threshold value of anti-laser damage is high, which can be applied to 20000W laser.
● The laser collimation effect is good, less than 1/10 wavelength.
● The film has good density and long service life.
Parameters of laser focus lens
Specification
Material
Fused Silica
Diameter Tolerance
+.000", -.005"
Thickness Tolerance
±.005"
Surface Figure
Plane: 1/0.5
Curve: 3/1 (Power/irregularity)
Centration
<.001"
Focal Length Tolerance
<1.0%
Surface Quality
<10-5 scratch-dig Laser Finish
Spectral Performance
Standard AR Coating type Both Sides @ 1070nm (AR Coating)
Absorption
<30PPM
Transmittance
>99.9%
Application Video
Features of collimator lens for laser
● The beam is highly collimated. After being adjusted by the fiber collimator, the divergence angle of the beam does not exceed 2°.
● Good consistency, the working distance consistency is greater than 99%.
● The laser light transmittance is high, the reflectivity is low, and the threshold value of anti-laser damage is high, which can be applied to 20000W laser.
● The laser collimation effect is good, less than 1/10 wavelength.
● The film has good density and long service life.
Parameters of laser focus lens
Specification
Material
Fused Silica
Diameter Tolerance
+.000", -.005"
Thickness Tolerance
±.005"
Surface Figure
Plane: 1/0.5
Curve: 3/1 (Power/irregularity)
Centration
<.001"
Focal Length Tolerance
<1.0%
Surface Quality
<10-5 scratch-dig Laser Finish
Spectral Performance
Standard AR Coating type Both Sides @ 1070nm (AR Coating)
Table of Contents1. Introduction2. Overview of UV Laser Marking Machines3. Marking Effects on Different Materials3.1 Non-metallic Materials3.2 Metal Materials4. Advantages of UV Laser Marking5. Application Examples of UV Laser Marking6. Conclusion
