Details Product Parameters Video
1. The operation is flexible and simple, and it can satisfy multi-angle and multi-position welding.
2. Equipped with 10m original imported optical fiber, it can be used for outdoor welding flexibly and conveniently.
3. Use infrared positioning to verify the position of the welding head and verify the position during the welding process. The welding position is more accurate, the weld seam is smooth and beautiful, easy to grind and polish, and no post-welding treatment or only simple treatment is required.
4. The laser welding depth is deep, the weld seam is firm, the width is small, the heat-affected zone is small, the deformation is small, and the welding speed is fast. Complicated welding between some dissimilar materials can be achieved.
5. The system can store a variety of different process parameters, which can be switched at any time through the touch screen according to processing needs, reducing the parameter debugging time.
1. Laser welding head
The light weight is only 0.8KG, flexible and convenient to weld metal parts of any shape, the weld width is adjustable, and it can perform long-distance welding with a length of 10 meters. With security temperature monitoring system.
2. Operation interface
Multi-language intelligent control panel, flexible adjustment of welding parameters, multi-group library of welding parameters and cumulative timing of light output etc.
3. Auto welding wire feeder system
Touch screen design, automatic wire filling, fully digital design, support 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm diameter stainless steel and aluminum wires.
4. Laser source
We used the customized the smallest 20um core diameter fiber from which can achieve more deeper penetration, laser lifetime up to 100,000 hours, maintenance free with blue teeth function.
5. Water chiller
Double circulating water cooling makes the laser source and welding head cool better, and the temperature control sensor adopts imported brands.
6. Solder connection fiber
The 10-meter-long fiber optic cable, built-in design, effectively avoids the damage of the fiber and the problems caused by moisture, and greatly increases the life of the laser components.
1. The operation is easy to learn and quick to use, and there is no technical threshold for operators. Ordinary workers can work on the job after a short training, and can easily achieve high-quality welding results.
2. The welding area has little thermal influence, is not easy to deform, blacken, and has traces on the back. The welding depth is large, the melting is sufficient, firm and reliable, and the strength of the weld reaches or even exceeds the strength of the base metal itself.
3. Equipped with double protection function of water circuit and air circuit (patented technology), which effectively avoids the damage of laser lens or optical components caused by operator's misoperation, thus greatly reducing the failure rate of the machine and effectively prolonging the service life of the machine. The life of the consumables.
4. Hand-held oscillating welding method, up to 5mm extra weld width - increase capacity and create highly aesthetic seams, 3000W with dual wire feeder, max seam width 8mm.
5. After the laser beam is focused, a small spot can be obtained, which can be precisely positioned and used for group welding of small and small workpieces to achieve mass production.
Single side weld thickness
Maximum melting | 1500W | 2000W | 3000W |
Stainless steel (mm) | 0.5-4 | 0.5-5/6 | 0.5-7 |
Mild steel (mm) | 0.5-4 | 0.5-6 | 0.5-7/8 |
Aluminum (mm) | 0.5-3 | 0.5-4 | 0.5-6 |
Brass/copper (mm) | 0.5-1.5 | 0.5-2 | 0.5-3 |
Galvanized sheet (mm) | 0.5-3 | 0.5-4 | 0.5-6 |
Iron (mm) | 0.5-4 | 0.5-6 | 0.5-7/8 |
Remark: Double weld thickness can be achieved if the material is welded from both sides in two times
Handheld head
● Independent research and development, set up multiple security alarms, simple and flexible operation.
● Visualize all parameters, monitor the status of the whole machine in real time, avoid problems in advance, facilitate troubleshooting and solve problems, and ensure the stable operation of the system.
● All process parameters can be set, and various process effects can be tested flexibly.
Automatic wire feeder
● Our wire feeder with touch capacitive screen, high precision wire feeder.
● 220V drive, more powerful wire feeding, no wire jamming.
Suntop wire feeder specifications | |
Wire feeding type | Automatic (also support the manual mode) |
Length of wire feed tube | 3m/5m optional (9.8ft/16.4ft) |
Interface | Low voltage enable signal line |
Wire feeding speed range | 40-600 cm/min (15- 230 ipm) |
Compatible wire diameter | 0.8 mm (0.031 inch), 1.0 mm (0.039 inch), 1.2 mm (0.047 inch), 1.6 mm (0.063 inch), 1.8 mm (0.071 inch), 2.0 mm (0.079 inch) |
Wire reel capacity | 1 kg (2 lbs), 5 kg (10 lbs) or 10 kg (25 lbs) by shaft change |
Compatible wire materials | Steel, stainless steel, aluminum (common to conventional MIG and TIG wires) |
Power requirement | 220V 50/60Hz |
Wire feed unit weight | 22 kg (48.4 lb) |
Wire feeder unit dimensions (L*W*H) | 560mm (22.0 inches) x 250mm (9.8 inches) x 360mm (14.2 inches) |
Application materials
It can be used for welding stainless steel, carbon steel, copper, aluminum, gold, chromium, silver, titanium, nickel and other metals or alloys. It can also be used for various welding between different materials, including copper – brass, titanium-molybdenum, titanium- gold, nickel-copper, etc.
Application industry
Widely used in cabinet kitchen, staircase elevator, shelf, oven, stainless steel door and window guardrail, distribution box, stainless steel furnishings and other industries.
Model | ST-FW1500H | ST-FW2000H | ST-FW3000H | ||
Max. output laser power (W) | 1500 | 2000 | 3000 | ||
Welding gun weight | 0.8 | 0.8 | 0.75 | ||
Max. welding thickness (mm) | ≤3 | ≤5 | ≤8 | ||
Max. welding seam width (mm) | 5 | 5 | 8 | ||
Laser type | Fiber laser (Suntop custom 20um welding exclusive) | ||||
Laser detection method | Bluetooth wireless connection, Mobile App Monitoring | ||||
Control panel language support | English, Spanish, German, French, Turkish, Italian, Russian, Vietnamese, Thai, Korean, Japanese, etc. | ||||
Laser wavelength (nm) | 1064+5 | ||||
Suitable welding materials | Carbon steel, stainless steel, aluminum, galvanized sheet metal, brass, iron and other metal materials | ||||
Adapted welding methods | Spot welding, overlap welding, splice welding, fillet welding, lap welding etc.. | ||||
Laser power adjustment range (%) | 10-100 | ||||
Cooling method | Advanced water-cooling, dual temperature control and automatic control | ||||
Welding aiming preview method | Built-in Red-Light pointer | ||||
Protection systems | Air pressure sensor and solenoid valve control | ||||
Length of fiber optic cable (meter) | Standard 10 (can be customized 15) | ||||
Welding shielding gas | Argon or nitrogen (air pressure approx. 6-8 bar) | ||||
Working environment | Temperature 5-45 °C /humidity 10-90% | ||||
Other optional support functions | Cleaning + cutting | Cleaning + cutting | Cleaning + cutting + weld bead cleaning | ||
Max. Cutting thickness (mm) | 1.2 | 1.5 | 2 | ||
Max. cleaning width (mm) | 40 | 40 | 120 | ||
Automatic wire feeder type (Universal with TIG wire) | Single wire feed | Single wire feed | Support both the double wire feed and single wire feed | ||
Solid wire type (SS, Iron, AL, Brass) | 0.8, 1.0, 1.2, 1.6 | 0.8, 1.0, 1.2, 1.6 | 0.8, 1.0, 1.2, 1.6, 2.0, 2.5 | ||
Temperature control monitoring alarm | Yes | Yes | Yes | ||
Main machine consumables | Laser protective lenes, welding nozzles, welding wires | ||||
Machine size (MM) | 686*425*611 | 750*1080*1000 | 750*1080*1000 | ||
Machine net weight (KG) | 110 | 220 | 240 | ||
Power supply requirement | 110V / 220V±10%, single phase | 380V±10%, three phase | |||
Total power consumption (Maximum) | 3500W | 4500W | 7000W | ||