Fiber laser marking machine service life and precautions?

Fiber laser marking machine to buy back how long can use, this can be said to be the most heard as a laser manufacturers, after all, the service life of a device is directly related to the cost of investment issues and how much value can be created. Fiber laser marking machine as the use of class machines, there will be a certain loss in the work process, with the longer the use of time, the work capacity will also have a certain degree of reduction. So how many years of service life of a fiber laser marking machine? The following follow Suntop laser together to understand.

First of all, as the core component of the fiber laser marking machine, the quality of the laser directly affects the working efficiency of the entire laser marking machine. Usually the laser life laboratory data is 100,000 hours. Calculated by working 24 hours a day, it can take 11 years. Excluding the laser attenuation that makes it impossible to mark on the workpiece, it can be used for six years based on the 40% output of the laser.

Of course, this is the theoretical data of the laboratory, and it will be different from the actual production environment and usage level. According to Suntop laser customer data, most fiber laser marking machines have been used by users for 5-8 years, and are currently running good.

Due to improper operation during daily use, there are also cases where the equipment purchased by some customers often has replacement parts or cannot be used within 5 years.

Developing good operating habits and regular maintenance of the machine can improve the service life of the fiber laser marking machine to a certain extent. The following summarizes a series of specific maintenance methods for the fiber laser marking machine.

(1) When the machine is not working, the marking machine and computer power should be cut off.

(2) When the machine is not working, cover the lens cover of the field lens to prevent dust from polluting the optical lens.

(3) When the machine is working, the circuit is in a high-voltage state. Non-professionals should not overhaul it when it is turned on, so as to avoid electric shock accidents.

(4) If there is any failure of the machine, the power supply should be cut off immediately.

(5) If the equipment is used for a long time, the dust in the air will be adsorbed on the surface of the lower end of the focusing mirror. If it is light, it will reduce the power of the laser and affect the marking effect; if it is serious, it will cause the optical lens to absorb heat and overheat and burst. When the marking effect is not good, you should carefully check whether the surface of the focusing mirror is polluted.

The service life of laser equipment is obtained during normal use, so the specific service life needs to be determined according to the frequency of use by customers. Suntop laser provides customized services for fiber laser marking machines, UV laser marking machines, and carbon dioxide laser marking machines.